ADVANTEGE 400
The ADVANTAGE 400 is a CNC system up to 5 axis. +/-10V as well as stepper output is available. The system is based on the powerful PMAC2 axis controller in association with an embedded PC104 computer. The front panel includes a flat screen, F-keys and keyboard for easy programming, debugging and management of the machine. The back panel includes all connectors for an easy and complete machine connection
COMPACT OPERATOR PANEL
6.4" LCD TFT or 7.4" DSTN Color Flat Panel Monitor 640*480, or 7.4" LCD B/W Display, Complete CNC standard keyboard with Alphanumeric Keys, F1-F10 Functions keys, Cycle Start / Cycle Stop / Reset buttons, Feed-rate potentiometer, Hand-Wheel 50 ppr, USB-Interface for Keyboard and other USB compatible peripherals.
EMBEDDED PC104 COMPUTER
586, 166 MHz CPU, 64MB SDRAM, 16MB Flash Disk, Windows CE.net Operating System,
Optional Flash Memory 32/64/128 MB and Ethernet RJ 45 interface
POWERFULL AXIS CONTROLLER CPU
Based on the DELTA TAU's PMAC2 technology, 40 MHz DSP563xx CPU (80 MHz 560xx equivalent), 128k x 24 internal zero-wait-state SRAM, 512k x 8 flash memory for user backup & firmware
COMPLETE CNC SOFTWARE INTERFACE
Provides all CNC needed pages (position, program editor, messages, tools management.)
RS274 G-code language with Linear, Circular and Spline interpolations
DNC-interface for running long programs from external memory
Up to 64 PLC's for I/Os and machine sequences management
Optional 2D graphical simulation
BUILT-IN FEATURES STANDARD
Leadscrew and planar compensation, Backslash compensation
Move until trigger, fast Capture of positions, Compare of positions with rapid output toggling
Master-Slave capability, External time-base feature for synchronization of part program to an external encoder
MACHINE HARDWARE INTERFACE
Simple and standard connection with Sub-D connectors
- 5-Axis control with +/-10V output command (or Pulse and Direction for stepper)
- 4xTTL encoder feedback.
- 1x4xTTL encoder feedback assignable for: 5th axis feedback, Hand-Wheel or external time-base
- 1x +/-10V outputs open loop
- 3x 12-bits analog Inputs
- 32 digital Inputs and 16 digital Outputs
- Optional Multiplexed I/O (JTHW) for extended Control Panel and extra I/Os
Main Screen
Axis Configuration Screen Page 1
General setup of axis, selecting type and specificities of each of them.
Motor 1, 2 and 3 are linear axis.
Motor 4 can be linear or rotary or Spindle.
Motor 5 can be a linear or rotary, or the encoder input can be used as an extra handwheel input.
Axis Configuration Screen Page 2
Setup of Flag functions, software over travel limits and JOG speed.
Axis Configuration Screen Page 3
Setup of Homing sequence:
Flag used to Home in, level of C channel, Home speed and Home search direction
Axis Configuration Screen Page 4
Setup of maximum allowed following error and Encoder counting direction.
General setting of Mill or Lathe machine type and some optional features (Input for E-stop.).
Tuning Screen
Easy Tuning!
Auto-Tuning with just one slider to make axis softer or stiffer.
Integrated automatic Plot function for performances check.
Advanced functions for modifying Auto-Tune or Test move parameters.
LIST OF STANDARD G, M AND T CODE
For Lathe machines:
G00
G01
G02
G03
G04
G09
G17/G18/G19
G25/G26
G32
G40/G41/G42
G50
G52
G61/G64
G70
G76
G80
G83
G90/G91
G96/G97
G98/G99
Txxyy
M00
M01
M03/M04/M05
M08/M09
M30
For Milling machines:
G00
G01
G02
G03
G04
G09
G17/G18/G19
G25/G26
G40/G41/G42
G52
G54 to G59
G61/G64
G68/G69
G80
G81
G84
G90/G91
G94/G95
Txxyy
M00
M01
M03/M04/M05
M08/M09
M30Ş
DIMENSIONS
-
-
- |
Rapid traverse
linear interpolation
Circular interpolation CW
Circular interpolation CCW
Dwell
Exact stop
Plane selection
Spindle speed detection
thread cutting
Tool nose radius compensation
Maximum spindle speed
Local coordinate system set
Exact stop mode
Finishing cycle
Multiple threading cycle
Canned cycle cancel
Peck drilling cycle
Absolute/Incremental move
Constant surface speed cutting
Feed per minute/revolution
Tool xx call and length yy compensation
Stop program
Optional stop program
Spindle CW/CCW/Stop
Coolant ON/OFF
End of program
Rapid traverse
linear interpolation
Circular interpolation CW
Circular interpolation CCW
Dwell
Exact stop
Plane selection
Spindle speed detection
Tool nose radius compensation
Local coordinate system set
Work coordinate system 1 to 6
Exact stop mode
Coordinate system rotation
Canned cycle cancel
Spot drilling cycle
Tapping cycle
Absolute/Incremental move
Feed per minute/revolution
Tool call and length compensation
Stop program
Optional stop program
Spindle CW/CCW/Stop
Coolant ON/OFF
End of program
304.6 mm
205.0 mm
100.0 mm |